Onda V80 Plus CHAMPAGNE GOLD under 100$ 07/31/2017Onda V80 Plus CHAMPAGNE GOLD under 100$ Onda V80 Plus Tablet PC
Onda V80 Plus is equipped with a Retina 10-point touch display, brings your photos and videos to life. Powered by Intel Cherry Trail X5-Z8350 processor, offers you smooth operation and stable multitasking experience. Decent cameras for capturing memorable moments and high quality pictures in daily life. Dual band 2.4GHz / 5.0GHz WiFi supported, ensures you high-speed surfing.
● Android 5.1
Allows you to remain connected and productive
● Intel Cherry Trail X5-Z8350 Quad Core 1.44GHz, up to 1.92GHz
Ultra-low-voltage platform and quad-core processing provide maximum high-efficiency power to go
● Intel HD Graphics 400 GPU
Better and faster in playing games and watching videos than the previous generation
● 8.0 inch 10-point Touch Screen with 1920 x 1200 Resolution
Offers good experience for watching videos and browsing the Web
● 2GB RAM 32GB ROM
Provides enough room for your use, can suit all your needs
● Dual Cameras for Photos and Face-to-face Chat
2.0MP AF rear-facing camera + 2.0MP front camera let you capture memorable moments or chat with friends
● Dual Band 2.4GHz / 5.0GHz WiFi
802.11b/g/n/ac wireless Internet, allows you to connect to the Web while within range of an available wireless network You Can now buy it for 99,99$ Link: Onda V80 Plus CHAMPAGNE GOLD Use Coupon: V80PLUS
Search the Community
Showing results for tags 'stane'.
Found 4 results
Here is the folder with Stane's ROM for Onda V975m. For now it contains: version 0.9.2 (kitkat 4.4.2, usb+twrp, wifi_fix, all_lang)version 1.0.0b (kitkat 4.4.2, usb+twrp, mic doesn't work)version 0.9.3a1 (lollipop 5.0.2, twrp, camera doesn't work)version 0.9.3a2 (lollipop 5.0.2, twrp, camera doesn't work)version 0.9.3a3 (lollipop 5.0.2, twrp, camera doesn't work)version 0.9.3a4 (lollipop 5.1.0, twrp, camera doesn't work)version 0.9.3b1 (lollipop 5.1.1, twrp, camera doesn't work)USB Burning Tool v.2.0.4V975mBootableSD MD5 Sums: 7e26e4c9cf7ebc30a20d3a59e5d46806 onda_v975m_0.9.2-usb.zip 68e3167e947aeb52d3d92af8f0900d09 onda_v975m_0.9.2.zip 16d84b06c157c9b8afab8af9623dcb4f Onda_V975m_KitKat-1.0.0b1-usb.zip 37851f14add223c8293184f974c0dd15 Onda_V975m_KitKat-1.0.0b1.zip 858903f4334cb01f602d3f5c4e2e8bea 20150225_Onda_V975mV3_lollipop-0.9.3a1.zip 801c79a9640e05a777670c13f9663d84 20150303_Onda_V975mV3_lollipop-0.9.3a2.zip 8478ae5975bec78b662cf9b7f06ce5fe 20150303_Onda_V975mV3_lollipop-0.9.3a3.zip e38e92246b5dfe3acb555512a7662756 20150303_Onda_V975mV3_lollipop-0.9.3a4.zip ee30eeee78b949bc51b035bb8d5ad4aa Onda_V975m_LP-0.9.3b1.zip
Octabitus posted a topic in Custom Rom for Onda v975mGood day to you all. My humble Onda v975m 2/32 V3 has passed to my wife's possession. Because she is - as most women tablet users - using it mostly for Facebook, she has spotted a couple of problems regarding the embedded videos on FB application. Therefore, I ask for your help in enlightening me regarding the situation. Tested and observed the following: 1. With ONDA_V975m_V3V4_v2.0.1_rozak-2014118-TWRP over ONDA_V975m_V3_v2.0.1_rozak_20140515-4G (for the 4G app space obviously), embedded videos of FB are playable but a) some videos appear rotated by 90 degrees clockwise b) all videos appear being played "behind" the FB application screen (scrolling is needed in order for centering of the video to be achieved). I have tried installing Flash Player 11.1 in case it fixes anything but then videos weren't playable anymore and FB app freezes and crashes - therefore I uninstalled Flash Player. 2. With stane1983 (0.9.2) rom, I can hear the sound of FB's embedded videos but there is no picture (black screen). Installing Flash Player 11.1 wasn't any help. I tried wiping cache/dalvik but that didn't do anything either. Is there anyone who has experienced any similar problems? Any suggestions or solutions are welcome. Thank you in advance for your time and effort.
Ok, let's start explaining what I did: First of all, I was running Rozak 2.0.1 based ROM with TWRP recovery. Everthing ran ok, some lag here and there and stuff but ok compared to stock. The time I flashed the Rozak's ROM was like MONTHS ago so I totally forgot the 2GB and 4GB thingie when 2 days ago tried to update to the Lollipop ROM from Stane. Well, what I did was download the Stane Lollipop SD CARD method ROM, put it in the SDCARD and reboot to recovery. Once in TWRP, I factory reseted the device/deleted data and cache, and proceeded to install the Stane ROM. If I remember correctly it threw some errors and the installation stopped. So I went to the thread again and noticed that PhilZ recovery was recommended. So I downloaded PhilZ recovery, stored it in the SDCARD root, and again booted into TWRP. I did flash it but some weird stuff happened, it again threw an error, rebooted and now I can only see backlight whenever I try to turn it on. Now, what I've tried to unbrick it: I've followed mostafataliza's post with the recommended suggestions from the others. I downloaded the 1.6 burning tool and the 2.0.4 burning tool from the thread, and then the "burning tools" rar from another thread where the 2.0.xxx burning tool is just to pick the u-boot.img and the .twp files. Ok then I first format the SDCARD (16GB Class 4) with SDFormatter with standar values, nothing modified. Then with the SDCardMaker from the "burning tools" I make the card bootable using the u-boot from the root of that general extracted archive, not the one inside the SDCardMaker archive. Once formated, I put inside the SDCARD those u-boot and .twp files and since I couldn't find any ROM with the recovery.img I downloaded the official 2.0.1 from ONDA just to pick the recovery.img and put it int he SDCARD. So I have those 3 files inside the SDCARD now: recovery, .twp and u-boot. After that I install the 2.0.4 burning tool just to get the World Cup drivers and I leave it for later. I start the 1.6 burning tool now and I put the 3 xml files inside the root with the SDCARD inside the tablet. I load first xml configuration file, plug the tablet in after disconnecting as much stuff as I can (speakers, keyboard, etc.) and I vol+ + POWER until it appears in the first USB position as connected. Then I select "START" and it runs some mmc lines like many times, with the blue icon blinking with "load", "load", "load" until it says after 15 trys that cannot connect. The first letter is W/ those 15 times, until the error (which means "Writte" I suppose). Then there's a E/ ("Error" I suppose) in the log and disconnects. At that momment didn't know if it was meant to work like that so I just kept the xml config files coming, my problem might be here but I keep on explaining what I did. I stop the script, turn off the tablet and close the burn tool 1.6. Once the tablet is turned off then again I open the burning tool and keep loading the 2nd and the 3rd xml files the same way, with the same result, the 15 log lines with W/ and then E/. Since in those 15 steps the icon blinks with "load" I think it might be doing something but no idea. After all the 3 xml are used, I close the burning tool, remove the SD card from the tablet and I download the 9.0.2 ROM from Stane using the link of mostafataliza's thread. Once downloaded I open the 2.0.4 burning tool and load the Stane 9.0.2 image. I plug in the tablet, use the vol+ + Power combo and the tablet is detected in first USB same as before. First try I tick all the 4 options with force erase all. I click on Start and it gives error in bootloader. I do the same and try with "force erase" this time, with same result. In the third try I untick all the options, no erase, no bootloader delete no nothing. I start the process, and at 4% it says Low Power some miliseconds and the device disconnects. Tried some more combinations with no better result. The log message whenever it gives more specific message is that cannot find device. What am I doing wrong? The 3 XML processes are supposed to work like that? Thanks. Oh, also I'm using Windows 10 64bit and tried with both, USB 2.0 and 3.0. I also left charging the tablet before I made some more tries and the same result with low power. Any hint or help? I'm desperate :_(
Hello everyone, I apologize for the English but use Google translator, I have a v975m V3 ROM Stane, I would like to connect a ps2 controller to the tablet, I OTG adapter, the adapter for the ps2 controller, connect them, and the light of analog switches on, but the controls do not work. I also tried the application to set the buttons but not required. I asked and ROM Rozak works. Do you know if it is a software problem of Stane? You can change it in some way! I want to play with my emulator FPSE