Jump to content
Onda Forum
  • Announcements

    • Krzysiek

      Blackview S8 4G Phablet   10/19/2017

      Blackview S8 4G Phablet 5.7 inch Android 7.0 MTK6750V 1.5GHz Octa Core 4GB RAM 64GB ROM 8.0MP + 0.3MP Dual Front Cameras Touch Sensor
      ● Display: 5.7 inch, 1440 x 720 Pixel screen
      ● CPU: MTK6750V 1.5GHz Octa Core
      ● System: Android 7.0
      ● RAM + ROM: 4GB RAM + 64GB ROM
      ● Camera: 8.0MP ( SW 13.0MP ) + 0.3MP front cameras + 13.0MP + 0.3MP back cameras
      ● Sensor: Ambient Light Sensor, Gravity Sensor, Proximity Sensor
      ● SIM Card: dual SIM dual standby. 1 Micro SIM card + 1 Nano SIM card
      ● Feature: GPS
      ● Bluetooth: 4.0
      ● Network:
      2G: GSM 850/900/1800/1900MHz
      3G: WCDMA 900/2100MHz
      4G: FDD-LTE 800/900/1800/2100/2600MHz Check it here.
RobV

Intel Manufacturing Flash Tool v6.0.2

Recommended Posts

Manufacturing Flash Tool.rar

 

Intel Manufacturing Flash Tool v6.0.2

 

The pack contains:

- IntelAndroidDrvSetup1.2.0

- iSocUSB-Driver-Setup-1.0.2

- ManufacturingFlashTool_Setup_6.0.2

 

 

Download Link:

 

EDIT:

All available download files are located in the Downloads directory.

“ Downloads “ button at the top of this page

Available files are grouped by Device named category

All files are listed in reverse chronological order ( newest upload file is listed first )

Most device categories each have multiple pages of listed file names.

 

 

 

Edited by RobV
Dir changes
  • Upvote 1

Share this post


Link to post
Share on other sites

Download server    Intel category   .... read available list

click file name ( below ) -- click buton " download this file " 

Hope this helped

 

btw ... files were moved from original download server and location ... with site growth ..

Good Luck

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

    • By djdisodo
      I changed the 'disable unused GPIO pins' option to 'on' in BIOS
      and I do not remember it, but I think I changed 'stats after g3' to s0 and I saved it
      after, it did not turn on. Backlight and screen did not come in
      my tablet always booted when I connected power trough otg hub. but it didn't turn on like before
      So I tried to disassemble and unplug the BIOS battery, but it did not have a bios battery and there was a chip called '25Q64FWIM'(I searched it it was EEPROM)
      I thought I should reset it
      I connected 8pin to each other and tried to boot but it didn't boot. However, when I disassemble it, I noticed that when the battery is repluged, the CPU is in a cold state. When I press the power button, the CPU became hot(seems like turned on but no screen). Can you tell what the symptoms are and how to fix them?
      before doing that I'd cleared all partition of internal rom and installed win 10 on there ((haha, installing driver was very difficult, if you want some help, tell me)
    • By Aangoan
      Hello I recently bought the tablet pc oBook 20 SE, and i wanted to remove the dual boot and turn it in a single boot device with remix os in it, is this possible?? can anyone help me??
    • By Che68
      Hi to all,
      I recently purchased the tablet V919 Air CH DualOS (no 3G), and I found out I do not have root permissions. Can someone help me unlock my device?
      Thanks.

    • By vorob
      Hello, I’ve got some strange issue that I’m eager to solve here.

      I’ve got Windows 10 Tablet from China. It’s called Onda 919 Air CH. It’s based Intel Cherry Trail platform so it has Intel Atom x5-Z8300 CPU and Intel HD Graphics (GEN 8).

      When I turn it on and run any 3d application (games, 3dmark) it will work just fine. Even Fur Mark (stress test for GPU) works perfectly for hours. But if you send it to sleep and wake up, in 3d applications you will see some artifacts and then driver reboots.

      I've got video with this problem http://www.youtube.com/watch?v=TZpa_DyZgUs

      At first i run Fur Mark from clean boot and it worked for 10 minutes. Then I sent tablet to sleep and after that Fur Mark worked only for 3 min and driver crashed. Same thing in 3dmark06, in hl2 etc.

      So after sleep/wake up smth breaks in driver and such thing happens.

      What could it be?

      I tried another GFX driver, tried to re-install windows, nothing helps.

      Asked two other owners of this wonderful tablet, but they don't have driver crash in this benchmark after sleep mode.

       
    • By RobV
      Brush tool.zip
       
      V698 4G models V1.0.7 firmware Brush Pack
      File size:        463MB
      Update:          2014-09-25
       
      Description:  
      1 optimization algorithm to improve the speed and accuracy of GPS positioning.
       
      Note:
      1, this Brush Pack for machine brush package, should be used with Brush tool, connected to a computer operating Brush, apply only to boot the machine or system failure occurs use.
      2, machine brush package upgrade will clear all the data plate, please make a backup of work in front of Brush.
       
       
      Download Link:
       
      EDIT:
      All available download files are located in the Downloads directory.
      “ Downloads “ button at the top of this page
      Available files are grouped by Device named category
      All files are listed in reverse chronological order ( newest upload file is listed first )
      Most device categories each have multiple pages of listed file names.
       
       
      Onda.cn Link:
      http://onda.cn/Tablet/ProductInfo.aspx?ProductId=295&d=down
       


Gearbest Gearbest Tablets - Up To 75% OFF promotion
Gearbest Tablets - Up To 75% OFF






  • Recently Browsing

    No registered users viewing this page.

×