Jump to content
Onda Forum
Gearbest Xiaomi Smartest Bestsellers promotion
Xiaomi Smartest Bestsellers

Recommended Posts

onda_v975m_tablet.jpg
 
 
You need two USB burning tools for that
 
 
 
First extract  the three scripts
 
 
Start USB burning tool V1.6...
 
  1. File --> Import Config File --> load first XML file --> click to "Start"
    USB connect the tab. Insert SDCard with ONLY u-boot.bin on it. Power/Vol+
    USB Tool runs first script. Watch the log section in USB tool.
    Click to stop
    Power tab off - long press until tab disappears in device manager.
     
  2. File --> Import Config File --> load second XML file --> click to "Start"
    Power/Vol+
    USB Tool runs second script. Watch the log section in USB tool.
    Click to stop
    Power tab off - long press until tab disappears in device manager.
     
  3. File --> Import Config File --> load third XML file --> click to "Start"
    Power/Vol+
    USB Tool runs third script. Watch the log section in USB tool.
    Click to stop
    Power tab off - long press until tab disappears in device manager.
     
  4. Close USB burning tool V1.6...
  5. Remove SDCard
  6. Start USB burning tool V2...(setup_v2.0.4_x86_by-mostafataliza.exe)
  7. Click to second menu in the tool and switch to english.
  8. File --> Import Image --> Select stane1983's V0.9.2 USB ROM image file
  9. click to "Start"
  10. Power/Vol+
  11. Cross fingers and hope the tool does it's job.
 for those who are getting erors when flashing rom using USB-BURNING-TOOL   just  check the first option in configuration ( erase flash) and the second (erase bootloader)  and the fourth  (overwrite key)
  • Like 1
  • Upvote 2

Share this post


Link to post
Share on other sites

Hello. I was upgrading to Rozak lolipop through clean install and and tablet got stuck in the install process. After a lot of trial and error I was able to unbrick the tablet with the help of this guide and then tried flashing the Rozak rom again. Same thing happened but this time I can't seem to recover the tablet with this guide. The first part (bruning tool 1.6 with the config files) runs fine (although it seems that this time each step compleats a lot quicker than before), but when I try to flash the ROM, I get an error:
"[0x00202004]Erase bootloader/Implement/Send command/Error result".

Does anyone have any clues on how to fix this?

Share this post


Link to post
Share on other sites

I got this. Can u help me?(

[16:36:50 748][HUB5-7][Inf]--------------ERASE BOOTLOADER------------
[16:36:50 748][HUB5-7][Inf]--0-7-0-16
[16:36:50 748][HUB5-7][Inf]--Identify status success
[16:36:50 748][HUB5-7][Inf]--    low_power
[16:36:50 748][HUB5-7][Inf]--Low power command success
[16:36:50 764][HUB5-7][Inf]--Read low power success
[16:36:50 764][HUB5-7][Inf]--bootloader_is_old
[16:36:50 764][HUB5-7][Inf]--Bootloader command success
[16:36:50 764][HUB5-7][Inf]--Bootloader is old
[16:36:50 764][HUB5-7][Inf]--erase_bootloader
[16:36:50 764][HUB5-7][Inf]--Erase command success
[16:36:50 873][HUB5-7][Err]--failed:to erase bootloader
[16:36:50 873][HUB5-7][Inf]--Read erase status failed
[16:36:50 873][HUB5-7][Err]--[0x32010702]Uboot??????,?????????????

 

Share this post


Link to post
Share on other sites

I remember I had this error before  so  the  trick  is to keep checking and checking cases  until  it  works for ya 

 

For me it worked with this combination :  I checked   first case (erase flash) and the second (erase boot-loader)  and the fourth  (overwrite key)

Share this post


Link to post
Share on other sites

no you don't   just  try  to  fix  it  other  time  maybe  you are confused now  keep trying  somehow  it will unbrick believe me I had mine broken for 2 maybe more days 

 

Edit=  take out SD card 

Edited by mostafataliza

Share this post


Link to post
Share on other sites

After your intsructions i tried other intruction(there is on russian site), it doesnt help me. After i tried to install stane1983's V0.9.2 USB ROM image file again and it work. I need to instal normal ROM now :-)

Share this post


Link to post
Share on other sites

Hallo friends, I have onda tablet v3 and any rom i flash after rebot it crash.

I think that memory is corrupted.

Can I thy with this metod to solve my problem?

Share this post


Link to post
Share on other sites

Hallo friends, I have onda tablet v3 and any rom i flash after rebot it crash.

I think that memory is corrupted.

Can I thy with this metod to solve my problem?

give it a try  this  tutorial might fix your problem

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By mostafataliza
      You need two USB burning tools for that   . V1.6...  Usb-Burning-Tool v1.6   and V2....Usb-Burning-Toll v2.04   First extract  the three scripts     Start USB burning tool V1.6...       File --> Import Config File --> load first XML file --> click to "Start"
      USB connect the tab. Insert SDCard with ONLY u-boot.bin on it- extracted from stane 1983 rom-. Power/Vol+
      USB Tool runs first script. Watch the log section in USB tool.
      Click to stop
      Power tab off - long press until tab disappears in device manager.
        File --> Import Config File --> load second XML file --> click to "Start"
      Power/Vol+
      USB Tool runs second script. Watch the log section in USB tool.
      Click to stop
      Power tab off - long press until tab disappears in device manager.
        File --> Import Config File --> load third XML file --> click to "Start"
      Power/Vol+
      USB Tool runs third script. Watch the log section in USB tool.
      Click to stop
      Power tab off - long press until tab disappears in device manager.
        Close USB burning tool V1.6... Remove SDCard Start USB burning tool V2...(setup_v2.0.4_x86_by-mostafataliza.exe) Click to second menu in the tool and switch to english. File --> Import Image --> Select stane1983's V0.9.2 USB ROM image file click to "Start" Power/Vol+ Cross fingers and hope the tool does it's job.  for those who are getting erors when flashing rom using USB-BURNING-TOOL   just  check the first option in configuration ( erase flash) and the second (erase bootloader)  and the fourth  (overwrite key)  
    • By sheminasalam
      I often use computer softwares to connect and sync my tablet data. I have tried ut many times with other android tablets and suceeded too. But my new Onda v975m tablet is not recognised by any of the syncking softwares even after I put the tablet in usb debugging mode.Plz hlp me
    • By mostafataliza
      hi  every  one  please need  your  help  here  after  i  used  this  root__   ONDA_V975m_Root_SU-1.99-A4.3-20140521 __   my  tab   won't   boot   again  it  just  shows  the  onda  logo  nothing  more  i  even  cleared  cache  and  factory  reset  but  the  problem  remains  plzz  help    my  dad  will  be  mad  at  me  
×